Rentech 51.2V Rack-Mounted Lithium-Ion Battery – 150Ah

Description

  • SAFETY 
    • Over voltage protections system 
    • Low voltage protection system 
    • High temperature protection 
    • Low temperature protection 
    • Short circuit protection 
    • Over current protection 

     

    BATTERY MANAGEMENT SYSTEM (BMS) 

    • Separate control and protection for the charge and discharge processes to maximize system availability 
    • Real-time detection of voltage, current, temperature, SOH, SOC and a variety of protection 
    • Support for parallel connection only 

     

    CELL 

    • Lithium Iron Phosphate (LFP) prismatic cells with high safety and reliability 
    • Fully automated production following a mature and stable process, ensuring consistent charge / discharge performance and life span 
    • IEC62133, UL and UN38.3 certifications 

     

    BENEFITS OF SOLAR BATTERIES 

     

    • Source of clean energy 
    • Reduced noise levels compared to generators 
    • Cost savings 
    • Uninterrupted electricity supply 

     

    CONSIDERATIONS WHEN CHOOSING SOLAR BATTERIES 

     

    Capacity and power ratings 

    • A battery’s capacity is the total amount of energy it can store, measured in kilowatt-hours (kWh). The power rating is the amount of electricity that a battery can deliver at one time, measured in kilowatts (kW). A battery with high capacity and low power rating will deliver a low amount of electricity for a long time. A battery with a low capacity and high-power rating can run an entire home or larger operation, but only for a few hours. 

     

    Depth of Discharge 

    • Most solar batteries need to retail some charge at all time due to their chemical composition and to prolong their lifespan. The DoD refers to the maximum of a battery’s capacity that should be used. For example, sealed lead-acid solar batteries are usually operated at  £ 50% DOD to achieve a reasonable cycle life, while lithium-ion batteries can operate at 80% DOD, 8kWh from a 10kWh battery, and still provide 5 years or more cycle life. 

     

    Round-trip efficiency 

    • Round-trip efficiency represents the amount of energy that can be used as a percentage of the amount of energy required to fully charge a battery. For example, if a 5kWh capacity battery, which delivers 4 kWh electricity, would typically require 110% to 120% times the 4kWh to be fully recharged. The battery has 80% to 90% in round-trip efficiency. One should, however, remember that the battery is part of the total system, and the system also has inefficiencies and energy losses. 

     

    Battery life and warranty 

    A battery’s ability to hold a charge gradually decreases the more it is used. For example, a battery might be warrantied for 5000 cycles or 10 years at 70% of its original capacity. This means that at the end of the warranty, the battery will have lost no more than 30% of its original ability to store energy. 

    Solar batteries come with warranties that guarantee a certain number of cycles and/or years of useful life. 

    This product has a 5-year warranty with a 10-year warranty option (refer to Rentech Lithium Warranty form) 

 

 

BlueNova Lithium Battery Banks

PERFORMANCE: Charge/Discharge efficiency = 98% @ C10 Unmatched continuous power delivery Operates at up to 35°C without accelerated degradation   RELIABILITY: Minimum battery service life is 3600 cycles Auto-shutdown during fault conditions 10 Year battery warranty   ECONOMICAL: Costs less than R2 per kWh cycled Zero maintenance costs Up to 35% less PV panels /generator fuel required   The table below lists our latest standard product range, as well as maximum discharge current thresholds & lead acid equivalent values for each product. The conversion factor we’ve used to calculate lead…

0 comments

Lead Acid vs Lithium / LiFePO4 vs Lead Acid Cranking Test

Lead Acid vs Lithium LiFePO4 vs Lead Acid Cranking Test

0 comments
Name
Email
Phone
Enquiry