18AH – 12V Deep Cycle Lead Crystal Battery – BC-6CNFJ-18

Out of stock

Description

Lead Crystal® advantages

  • Full recovery Can be 100% discharged and then restored to full rated capacity daily.
  • Cleaner Less acid, no cadmium or antimony. Complies with increasingly strict international standards on protection of the environment.
  • Safer No risk of leakage, less harmful chemicals, less fluids because of crystallization.
  • Easy transportation Classified as non-hazardous for transport. The only battery allowed  as normal goods air-freight.
  • Guaranteed quality Each battery comes with a standard 3 year factory warranty.
  • Better usage performance Charges up to two times faster than conventional alternatives. Excellent high-current discharge ability.
  • Up to 99% Recyclable and increased sustainability.
  • Long battery life  Float service life up to 18 years. Up to 6000 charge/discharge cycles (20% DOD)
  • Long shelf life Can be stored 2 years with no refresh charging required. Simplifies logistics
  • Extreme temperature resistance Operates at temperatures from -40°C to +65°C

Lead Crystal®  technology consists of special features

A unique micro-porous high-absorbent mat (AGM), thick plates cast from a high purity lead calcium selenium alloy (which ensure an extended life), and a SiO2 based electrolyte solution.

Special electrolyte composition

By using a unique blending technology, Lead Crystal® is able to combine a variety of inorganic salts and organic substances to co-ordinate a combined reaction to improve the reaction ability between the electrolyte and active material on the lead plates. The electrolyte prevents the active material from becoming brittle and falling of the plates, improving the cycle life.

When charged/discharged the liquid electrolyte transforms into a crystallized state leaving hardly any free liquid electrolyte in the battery. This opens a wide range of installation applications, since the risk of electrolyte leakage is minimized. This reaction also improves the products’ safety, making it less harmful to installers and users alike.

Additional information

Weight 4.15 kg
Dimensions 181 x 76 x 152 mm
Application

,

Amp Hours

Volt

Warranty

LEAD CRYSTAL – Charging and commissioning requirements

Initial charging current to be 0.3C ( IE 30 amps for each 100 A/H)a.This requirement is important and must be adhered too at all times. Bulk charging voltage is 2.45volt per cell @ 25°C (14.7 v for a 12volt block)a.Charging below this rate will result in partial charging and void any warranty. Absorption charging voltage is also to be 2.45 volt per cell @ 25°Ca.This should continue until the tail current reaches at least 0.03C (IE 3 amps for a 100A/H battery). Float charging voltage to be set at 2.26667…

0 comments

Lead Crystal vs Lead Acid battery – Final Results.

A detailed analysis of performance between Lead Acid & lead Crystal batteries.

0 comments

LEAD CRYSTAL vs LEAD ACID vs LEAD GEL vs LITHIUM Batteries

Here is a quick overview of how Lead Crystal batteries compares with the main contenders in the rechargeable industrial battery sector. Click here to view our LEAD CRYSTAL SELECTION.

29 comments